Sportair and Biggin Hill, 1968–76

The aircraft was imported and registered to agents Sportair on 12/7/68, a weighing from the time show it as a heavy aeroplane compared to the optimistic published figures.

It was leased? (Listed as ‘charterer’ on G-INFO) from 4/11/68 until 3/2/76 to a John Edge and stayed at Biggin flying as part of the Sportair fleet but while raced (No. 36) it was never a popular aerobatic mount due to its weight and ‘airways’ panel so never abused according to Brian Stevens (Owner / CFI of Sportair).

Cambridge, then Nympsfield

It then passed onto Eric Goodwin and Chris Williamson on 2/3/76 and was based in the Cambridge area, on 20/11/95 ownership passed to the Nympsfield RF4 Group in 1995 to replace RF4D G-AVNX which had been crashed.

(One of the syndicate had tried to land in a field near his holiday home in North Wales and hit the far hedge, damage was minimal but the aircraft was written off and bought by a syndicate member who repaired it.)

Unfortunately any kind of maintenance record up until this point were either non-existent or had been ‘lost’ and the 2 logbooks (now archived) say very very little.

I had worked as an instructor at Nympsfield in 96/97 and thought about buying a share but due to nature of instructing, I moved on and passed on the share.

However, in 1998 the engine was modified to 1600cc engine with a bespoke stainless steel, formed (rather than stock cut & shut) induction system with larger than standard diameter tubes with formed slip joints that mated with bespoke cast inlet manifolds of matched diameter to both the head ports.

Stainless steel formed exhausts with id matched to head exit ports were also made and fitted.

A Zenith CD150 is mounted under the engine with K&N filter.

Work was done by then group member Pete Mallinson and was completed with a ground adjustable Arplast Ecoprop.

I returned to Nympsfield to work for Roger Targett (Roger Targett Sailplane Services) in 1999 after he called me out of the blue and asked me to come and work with him and so after working on LZ in Roger’s I bought a share later that year.

The first rebuild, 2005–06

The fabric on LZ was far from in mint condition and at the time myself and a friend were looking after the club gliders and tugs as Vice Chairman and Glider Member on the committee.

So having secured use of the club workshop on return from the Fournier meet at Lapalisse in September 2005 LZ went into the workshop.

From 13/9/05 until 9/6/06 the aircraft was totally stripped and recovered at Nympsfield by myself and Jon French using Randolph system with Ceconite Lite fabric and finished in coloured white / blue butyrate dope with the cowls, fairings etc finished in 2 pack.

Roger (Targett) oversaw the project during which the engine had been overhauled by its builder Pete Mallinson and signed for by Roger.

On completion mylar seals and various fairings were fitted.

The group still consisted of 9 members but other than a couple flying it on a Sunday morning I was the main user flying after work several nights a week and on Saturdays.

Staverton

I moved to Churchdown in 2008 having started work at Tiger Airways at Staverton in June 2007 and so the aircraft was flying little while living on a damp hill and was starting to show signs of neglect as other group members were not flying much and so in 2012 I moved it with me to live in Tigers heated hangar at Staverton.

Having got there one of the first jobs was to again repair the underside of the tail due to rot (AD83-15) having set in which was done in 2013 only 8 years after its previous repair.

This time done with West Epoxy and more waterproof than a boat.

I had been collecting shares and the move to Staverton caused most of the remainder of the group (frightened by having to talk to ATC on radio) to sell their shares giving me 8/9th of the aeroplane.

I then sold shares to James Hallam, Mike Dentith & Trevor Bailey with Mike selling when he bought N1700 (G-RFAD) which I restored for him and with James & I buying Trevors share from his wife after his fatal accident in his MK26 Spitfire.

Meanwhile having bought a crashed Dimona for the engine to be rebuilt for RF5 G-AZJC I acquired 2 very expensive Cleveland wheels with disc brakes from the Dimona wreckage.

In 2015 I developed a mod and LZ got a Cleveland disc brake conversion with Matco stick operating lever mod approved.

The 1835cc engine

Meanwhile I had been talking to Francis Donaldson (Then LAA Chief Engineer) about building an 1835cc engine and justifying my case with logic and measurements rather than maths when Trev had a cam plug failure in flight.

To replace the cam plug the crankcase has to be split so Francis took pity on me and said yes, build your new engine.

Jon French built the new engine using only the crank and con rods from the old engine after dimensionally & NDT testing.

The new case came from Stateside tuning and was machined for the 92mm barrels on delivery after James had said that he was too busy to do the machining and that Jon would have to do it.

When I rang him to thank and ask if he wanted more money it turned out that it was a race prepped case with enlarged oil ways and could he have it back please? Sorry Jon already relieved the bell housing flange for induction pipe clearance.

So in 2016 LZ got its 1835cc engine followed by a Hercules prop and another new instrument panel.

Hangar 47, and moving on

When Tiger went bust LZ stayed in the hangar while Jon and I operated as Hangar 47 Maintenance.

But Jon had a stroke almost 12 months to the day of starting up and so we wound up the business and LZ moved to a new home with the biz jets in James’ hangar.

However, while in ‘our’ hangar the rent had been sensible but James’ hangar belonged to the airport and they dictated the rent which was far more and kept increasing until new management effectively doubled everyone’s rent and everyone moved out.

We were able to move LZ to Rendcombe in Jan 2024 but bringing back for permit work in April we found we had engine issues.

Unfortunately with Trev putting ‘mogas’ in, the engine had suffered fuel starvation and detonation which he kept referring to as ‘carb ice’ a problem LZ had never suffered.

This resulted in the engine going to Stateside for rebuild.

The airframe was taken apart for store while this was going on so having got the engine back and the airframe reassembled ready to get a permit we were then hit by the torrential rain in September 2024 so we decided to take it apart again and store until spring rather than have it sat unflown in another damp hangar at Rendcombe.

So it sat in store with an inhibited unrun engine in a nice warm store along with James’ RF4 (G-AWEL) and our RF7 (G-EHAP) and RF6b (G-BLWH).

During the time in store James had made new baffles and overhauled the undercarriage assembly with mark 3 leg casting.

Back to the Sportair family

The aircraft was reassembled and flown again on 29/6/25 until withdrawn from use on 6/10/25 following deposit on its sale to niece of Brian Stevens and daughter of Gordon Franks, directors of Sportair who imported and operated LZ.

It has subsequently had the fuselage and tailplane cleaned back and blown over into a yellow scheme while the wing is being recovered before export to Australia.

— Dave Bland, September 2026